Items where Subject is "Engineering"

Article

., Tanimola Joshua. I and Apata, A. C. and Dawodu, Praise Onimisi (2024) An Evaluation of Mechanical Behaviors of Baghouse Dust in Asphalt Concrete Mix Using Discrete Element Method (DEM). Journal of Engineering Research and Reports, 26 (7). pp. 278-284. ISSN 2582-2926

Aghajarian, Mickael and Kiani, Kourosh and Fateh, Mohammad Mehdi (2012) Design of Fuzzy Controller for Robot Manipulators Using Bacterial Foraging Optimization Algorithm. Journal of Intelligent Learning Systems and Applications, 04 (01). pp. 53-58. ISSN 2150-8402

Al-Agtash, Salem and Alkhraibat, Asma and Hashem, Mohamad Al and Al-Mutlaq, Nisrein (2021) Real-Time Operation of Microgrids. Energy and Power Engineering, 13 (01). pp. 51-66. ISSN 1949-243X

Alizadeh-Birjandi, Elaheh and Alshehri, Ali and Kavehpour, H. Pirouz (2019) Condensation on Surfaces With Biphilic Topography: Experiment and Modeling. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

Almashakbeh, Atef (2019) Three Phase Inverting Using Pulse Width Modulation Controlled by 6802 Motorola Microprocessor. Journal of Engineering Research and Reports, 7 (4). pp. 1-6. ISSN 2582-2926

Ao, Youyun and Chi, Hongqin (2012) Differential Evolution Using Opposite Point for Global Numerical Optimization. Journal of Intelligent Learning Systems and Applications, 04 (01). pp. 1-19. ISSN 2150-8402

Ayachi, Errachdi and Ihsen, Saad and Mohamed, Benrejeb (2012) A Comparative Study of Nonlinear Time-Varying Process Modeling Techniques: Application to Chemical Reactor. Journal of Intelligent Learning Systems and Applications, 04 (01). pp. 20-28. ISSN 2150-8402

Babatunde, Awosanya and Nwaogazie, Ify L. and Ikebude, Chiedozie F. (2023) Water Quality Assessment of Nigerian Port Authority Waterway in Port-Harcourt, Rivers State, Nigeria. Journal of Engineering Research and Reports, 25 (1). pp. 110-120. ISSN 2582-2926

Baz, Amr (2022) Non-reciprocal piezoelectric metamaterials with tunable mode shapes. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Berezin, Kirill V. and Dvoretskiy, Konstantin N. and Nechaev, Vladimir V. and Likhter, Anatoliy M. and Shagautdinova, Ilmira T. and Tuchin, Valery V. (2020) Optical Clearing of Human Skin Using Polyethylene Glycols. Journal of Biomedical Photonics & Engineering, 6 (2). ISSN 2411-2844

Chen, Yong and Jin, Lu and Tang, Xu and Huang, Dandan and Zhang, Jiguo (2022) Dynamic Response of a Composite Fan Blade Excited Instantaneously by Multiple MFC Actuators. Aerospace, 9 (6). p. 301. ISSN 2226-4310

Cui, Xiao and Jia, Boqi (2021) Thermal Effect on the Instability of Annular Liquid Jet. Aerospace, 8 (12). p. 382. ISSN 2226-4310

Deng, Zhao and Bing, Fuqiang and Guo, Zhiming and Wu, Liaoni (2021) Rope-Hook Recovery Controller Designed for a Flying-Wing UAV. Aerospace, 8 (12). p. 384. ISSN 2226-4310

Dinganga, H. Mbanza and Muamba, Y. Tuakashikila and Mambote, C. Tumuinimo and Mukaya, A. Malumba and Nzunzu, J. Lami and Temo, V. Sumuna and Katshiatshia, H. Mbuyi (2021) Comparative Study of Performances of a Single-Cylinder Diesel Enginefueled with Pure Diesel and Blends of Biodiesels/Pure Diesel. Energy and Power Engineering, 13 (03). pp. 111-125. ISSN 1949-243X

Eckl, Martin and Lepper, Thomas and Denkena, Berend (2016) Development of a Flexible Multibody Model to Simulate Nonlinear Effects in Printing Process. Modern Mechanical Engineering, 06 (01). pp. 10-19. ISSN 2164-0165

Gogom, Mathurin and Gomba, Rodolphe and Lilonga-Boyenga, Desire (2021) Influence of Capacitive Effects on Transformer Windings. Energy and Power Engineering, 13 (02). pp. 67-80. ISSN 1949-243X

Gomes, Nelma and Tuchin, Valery V. and Oliveira, Luís M. (2020) UV-NIR efficiency of the refractive index matching mechanism on colorectal muscle during treatment with different glycerol osmolarities. Journal of Biomedical Photonics & Engineering, 6 (2). ISSN 2411-2844

Halawa, Mohamed A. E. and Fouad, Hanan A. and Elhefny, Rehab M. and Wail, A. F. (2019) Improvement of Final Settling Tanks Performance by Using Chemical Additions. Journal of Engineering Research and Reports, 7 (4). pp. 1-7. ISSN 2582-2926

Hashimoto, Hiromu (2016) Intelligent Winding Machine of Plastic Films for Preventing Both Wrinkles and Slippages. Modern Mechanical Engineering, 06 (01). pp. 20-31. ISSN 2164-0165

Hilger, Jonathan and Ritter, Markus Raimund (2021) Nonlinear Aeroelastic Simulations and Stability Analysis of the Pazy Wing Aeroelastic Benchmark. Aerospace, 8 (10). p. 308. ISSN 2226-4310

Ichetaonye, S. I. and Ichetaonye, D. N. and Tenebe, O. G. (2016) Study of Mechanical and Micro-Structural Effect on Alkaline Treated Sponge Gourd ( Luffa aegyptiaca ) Fibre Epoxy Composite. Modern Mechanical Engineering, 06 (01). pp. 1-9. ISSN 2164-0165

Kang, Soo-Jin and Park, Sung-Woo and Choi, Hye-Yoon and Ryu, Gu-Hyun and Kim, Jong-Pil and Jung, Sung-Hoon and Kim, Se-Young and Lee, Hyon-Ik and Oh, Hyun-Ung (2021) Thermo-Mechanical Design and Validation of Spaceborne High-Speed Digital Receiver Unit for Synthetic Aperture Radar Application. Aerospace, 8 (10). p. 305. ISSN 2226-4310

Karvounis, Panagiotis and Tsoumpris, Charalampos and Boulougouris, Evangelos and Theotokatos, Gerasimos (2022) Recent advances in sustainable and safe marine engine operation with alternative fuels. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Khan, Nazmul and Sutherland, Duncan and Wadhwani, Rahul and Moinuddin, Khalid (2019) Physics-Based Simulation of Heat Load on Structures for Improving Construction Standards for Bushfire Prone Areas. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

Kim, Hyeong-Geun and Lee, Jun-Yong (2021) Generalized Guidance Formulation for Impact Angle Interception with Physical Constraints. Aerospace, 8 (10). p. 307. ISSN 2226-4310

Kim, Yong-Woo and Lee, Seoung Yeal (2015) FE Dynamic Analysis Using Moving Support Element on Multi-Span Beams Subjected to Support Motions. Modern Mechanical Engineering, 05 (04). pp. 112-121. ISSN 2164-0165

Liang, Haijun and Liu, Changyan and Chen, Kuanming and Kong, Jianguo and Han, Qicong and Zhao, Tiantian (2021) Controller Fatigue State Detection Based on ES-DFNN. Aerospace, 8 (12). p. 383. ISSN 2226-4310

Liang, Xiaoguo and Zhu, Jinsong and Ye, Yinghua and Li, Yuan-Liang (2017) Investigation into PCB Routing Loss for Coupled Inductor Based VR (Voltage Regulator) Design in Server Computing System. Energy and Power Engineering, 09 (04). pp. 464-474. ISSN 1949-243X

Lin, Ohn Zin and Miyauchi, Hajime (2017) Optimal Replacement Time of Electrical Components Based on Constant-Interval Replacement Model: Equipment Inspection Method and Weibull Analysis. Energy and Power Engineering, 09 (04). pp. 475-485. ISSN 1949-243X

Liu, Cong and Men, Deyue and Xu, Dan and Ding, Qiang and Huang, Guodong and Dai, Sai and Zhou, Jingyang (2017) Optimization of Minimum Power Output for Combined Heat and Power Units Considering Peak Load Regulation Ability. Energy and Power Engineering, 09 (04). pp. 452-463. ISSN 1949-243X

Liu, Jingxi and Xu, Bo and Li, Chengzhang and Li, Muzi (2022) Lifetime Extension of Ultra Low-Altitude Lunar Spacecraft with Low-Thrust Propulsion System. Aerospace, 9 (6). p. 305. ISSN 2226-4310

Majeed, Abdul Jaleel Hamad (2015) Studying the Preheating Effect on Certain Mechanical Properties of the Coating Layer by Vacuum Ion Plasma Coating. Modern Mechanical Engineering, 05 (04). pp. 105-111. ISSN 2164-0165

Maraqa, Manar and Al-Zboun, Farid and Dhyabat, Mufleh and Zitar, Raed Abu (2012) Recognition of Arabic Sign Language (ArSL) Using Recurrent Neural Networks. Journal of Intelligent Learning Systems and Applications, 04 (01). pp. 41-52. ISSN 2150-8402

Mbinkar, Edwin N. and A. Asoh, Derek and Tchuidjan, Roger and Baldeh, Amadou (2021) Design of a Photovoltaic Mini-Grid System for Rural Electrification in Sub-Saharan Africa. Energy and Power Engineering, 13 (03). pp. 91-110. ISSN 1949-243X

Murayama, Riichi and Matsumoto, Kenshi and Ushitani, Kenji and Makiko, Makiko (2015) Pipe Inspection System by Guide Wave Using a Long Distance Waveguide. Modern Mechanical Engineering, 05 (04). pp. 139-149. ISSN 2164-0165

N. Khater, Ahmed and B. A. Beshara, Fouad and A. Mahmoud, Ahmed and O. El-Mahdy, Osama (2019) Progressive Collapse Potential of Ordinary Moment Resisting R/C Frames. Journal of Engineering Research and Reports, 7 (4). pp. 1-13. ISSN 2582-2926

Nga, Le Thi Thuy and Lan, Le Hung (2015) Application of Null Space Based Behavior Control to the Swarm Robot’s Control. Modern Mechanical Engineering, 05 (03). pp. 97-104. ISSN 2164-0165

Nguyen, Ngoc Phi and Xuan Mung, Nguyen and Ha, Le Nhu Ngoc Thanh and Hong, Sung Kyung (2022) Fault-Tolerant Control for Hexacopter UAV Using Adaptive Algorithm with Severe Faults. Aerospace, 9 (6). p. 304. ISSN 2226-4310

Nwankwo, I. H. and Nwaiwu, N. E. and Nwabanne, J. T. (2019) The Dynamics of Solids Removal in Waste Stabilization Ponds. Journal of Engineering Research and Reports, 7 (4). pp. 1-10. ISSN 2582-2926

Pashazanusi, Leila and Kristiansen, Kai and Li, Shaowei and Tian, Yu and Pesika, Noshir S. (2019) Role of Interfacial Water and Applied Potential on Friction at Au(111) Surfaces. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

Qu, Zhi and Zhang, Gaofei and Meng, Ziyang and Xu, Kai and Xu, Ruiqin and Di, Jiaojiao (2022) Attitude Maneuver and Stability Control of Hyper-Agile Satellite Using Reconfigurable Control Moment Gyros. Aerospace, 9 (6). p. 303. ISSN 2226-4310

Raji, Nurudeen A. and Erameh, Andrew A. and Yussouff, Abiodun A. and Durojaye, Rasheed O. (2016) Response Surface Methodology Approach for Transmission Optimization of V-Belt Drive. Modern Mechanical Engineering, 06 (01). pp. 32-43. ISSN 2164-0165

Roli, Amuah Freda and Joel, Ogbonna and John, Anthony (2023) Artificial Neural Networks for Modeling Rheological Properties under High-Temperature and High-Pressure in Gas Well Cement Slurries. Journal of Engineering Research and Reports, 25 (5). pp. 1-16. ISSN 2582-2926

Salleh, Sittilin and Zakariya, Mohd Azman and Ali Lee, Razak Mohd (2021) A Comparison Study of Rectifier Designs for 2.45 GHz EM Energy Harvesting. Energy and Power Engineering, 13 (02). pp. 81-89. ISSN 1949-243X

Sattari Baboukani, Behnoosh and Nalam, Prathima C. and Komvopoulos, Kyriakos (2022) Nanoscale friction characteristics of layered-structure materials in dry and wet environments. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Shibata, Masatomo and Zhang, Chao and Ishimatsu, Takakazu and Tanaka, Motohiro and Palomino, Joel (2015) Improvement of a Joystick Controller for Electric Wheelchair User. Modern Mechanical Engineering, 05 (04). pp. 132-138. ISSN 2164-0165

Tan, Xianghua and Sun, Yushi and Zeng, Weili and Quan, Zhibin (2022) Congestion Recognition of the Air Traffic Control Sector Based on Deep Active Learning. Aerospace, 9 (6). p. 302. ISSN 2226-4310

Tian, Haigang and Hao, Tianyi and Liu, Chao and Cao, Han and Shan, Xiaobiao (2021) Investigation of a Portable Wind Tunnel for Energy Harvesting. Aerospace, 8 (12). p. 386. ISSN 2226-4310

Viscor, Tor and Isochi, Hikaru and Adachi, Naoto and Nagata, Harunori (2021) Burn Time Correction of Start-Up Transients for CAMUI Type Hybrid Rocket Engine. Aerospace, 8 (12). p. 385. ISSN 2226-4310

Wang, Qingqi and Hirata, Terumitsu (2021) Relief Aircraft Dispatch Strategies Based on Different Levels of Information Sharing Systems. Aerospace, 8 (10). p. 306. ISSN 2226-4310

Xu, Qiang and Cao, Xiangyu and Chen, Jianyun and Li, Jing and Cao, Yang (2017) Study on Contact Explosion Performance of Nuclear Containment. Energy and Power Engineering, 09 (04). pp. 486-494. ISSN 1949-243X

Yang, Zhiwei and Wang, Liangming and Chen, Jianwei (2021) Movement Characteristics of a Dual-Spin Guided Projectile Subjected to a Lateral Impulse. Aerospace, 8 (10). p. 309. ISSN 2226-4310

Yin, Jiuli and Huang, Jing and Fan, Xinghua (2019) Chaos Control of a Resource-Economic-Pollution Dynamic System. Journal of Engineering Research and Reports, 7 (4). pp. 1-9. ISSN 2582-2926

Zarandi, Mohammad Hossein Fazel and Khademian, Mahdi and Minaei-Bidgoli, Behrouz and Türkşen, Ismail Burhan (2012) A Fuzzy Expert System Architecture for Intelligent Tutoring Systems: A Cognitive Mapping Approach. Journal of Intelligent Learning Systems and Applications, 04 (01). pp. 29-40. ISSN 2150-8402

Zhang, Chao and Shibata, Masatomo and Takashima, Keisuke and Yu, Jiangli and Ishimatsu, Takakazu and Palomino, Joel (2015) An Environmental Control System for ALS Patient Using Finger Movement. Modern Mechanical Engineering, 05 (04). pp. 122-131. ISSN 2164-0165

Zhang, Lixia and Kang, Wei and Zhang, Xiaoping (2017) A Practical Electric Arc Furnace Model for Computer Simulation. Energy and Power Engineering, 09 (04). pp. 445-451. ISSN 1949-243X